New Device Support - RGBgenie ZB-5121

[puithove]

I'd like to request support of these nice battery powered ZigBee 3.0 remotes. I previously had these working well under Home Assistant's ZHA but am working on converting over to deconz. Under ZHA, they create very reliable zha_event events that can be used to trigger automation. I'd like to be able to continue to use these in deconz the same way, exposing deconz_event to Home Assistant.

https://rgbgenie.com/?product=rgbgenie-mini-remote-with-single-scene-recall-zigbee

[SwoopX]

Can you also please provide a screenshot of the node info panel?

[puithove]

@SwoopX It looks like that last screenshot is the Node Info panel? Is there something that I'm missing? Can you give me an example of what to look for?

[puithove]

Here's another one, just in case

[SwoopX]

Sry, my bad. Thanks anyway.

[puithove]

No worries 👍 let me know if you need anything else.

[gmitch64]

Would it be possible to add support for the remote in the issue that I just see linked :)

G

[SwoopX]

So, support should be in and available with version .76. You need to try it out and let me know if it works alright.

[puithove]

Nice, I will check it out and let you know here once I see my deconz container updated in HA. Thanks!

[puithove]

I added it via Switches (like I did my one Phillips Hue Dimmer and the others of these) in Phoscon, but while deconz registered it, Phoscon didn't.

You can see that it was recognized properly by deconz now. However, it is not generating deconz_event

[SwoopX]

Hm, have you tried pushing some buttons while it was searching? Maybe also try the sensor seach to see if that has any notable effect.

[puithove]

I did, but it doesn't seem to change anything. Same results unfortunately. Is there a log file I can collect that might help?

[SwoopX]

Absolutely. You can rund deconz with extensive debug output enabled if you add --dbg-info=2 to the binary call and pipe the output to a file. When you then press each button short, long and double, that should give more insights. You just need to recall that order, so I know which button was pressed.

I've also provided an update for the remote, as I recognized a probably non working button mapping.

[puithove]

I'm still on .76

Unfortunately since I'm running deconz with HA's built-in addon, HA is managing the docker container and I don't see if/where it writes out the console output. It does show the output in their web UI, so I can grab just snippets, it's difficult to send the whole log (which I'd normally do). Here is a snippet for the short-press "Off" button (there is no long-press action for the On or Off buttons on this remote).
07:29:13:667 poll node 00:17:88:01:08:14:90:cc-0b 07:29:13:668 Poll light node Living Room - Hanging Vintage 07:29:13:720 read attributes of 0x00178801081490CC cluster: 0x0006: [ 07:29:13:720 0x0000 07:29:13:720 ] 07:29:13:720 add task 2215 type 19 to 0x00178801081490CC cluster 0x0006 req.id 124 07:29:13:721 Poll APS request 124 to 0x00178801081490CC cluster: 0x0006 07:29:14:242 Idle timer triggered 07:29:14:243 Force read attributes for SensorNode Garage - Door 07:29:16:242 Daylight now: goldenHour1, status: 160, daylight: 1, dark: 0 07:29:16:341 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0006 cmd: 0x00 pl[0]: 000 07:29:21:183 node 0EC1BBDFFFE9870B3 leave wait state 07:29:21:243 Idle timer triggered 07:29:21:243 Force read attributes for SensorNode Workshop - Motion Sensor 07:29:21:269 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030) 07:29:21:342 node 0001788010817BBBE leave wait state.

The only thing I can see is the no button map

for each button that I press, but I'll grab the surrounding lines in case there's something there that's useful for you.

Here is the short-press "On" button:
07:33:56:242 Daylight now: goldenHour1, status: 160, daylight: 1, dark: 0 07:34:00:263 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0006 cmd: 0x01 pl[0]: 000 07:34:01:242 Idle timer triggered 07:34:01:243 binding for attribute reporting SensorNode Foyer - Motion Sensor of cluster 0x0400 seems to be active 07:34:01:243 Force read attributes for SensorNode Foyer - Motion Sensor 07:34:01:271 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030)

Short-press "Dim" button:
07:34:57:243 Force read attributes for SensorNode Garage - Door 07:35:00:991 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x06 pl[0]: 001 07:35:01:268 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030)

Long-press and release "Dim" button:
07:35:54:765 Node data 0x286d9700010a7d8d profileId: 0x0104, clusterId: 0xFC02 07:35:54:765 0x286D9700010A7D8D: update ZCL value 0x01/0xFC02/0x0012 after 0 s 07:35:54:765 0x286D9700010A7D8D: update ZCL value 0x01/0xFC02/0x0013 after 0 s 07:35:54:765 0x286D9700010A7D8D: update ZCL value 0x01/0xFC02/0x0014 after 0 s 07:35:54:765 no button map for: multi ep: 0x01 cl: 0xFC02 cmd: 0x0A pl[0]: 012 07:35:54:765 ZCL attribute report 0x286D9700010A7D8D for cluster: 0xFC02, ep: 0x01, frame control: 0x0C, mfcode: 0x1241 07:35:54:765 payload: 120029f4ff130029e2ff14002911fc 07:35:54:766 Websocket 172.30.32.1:48632 send message: {"e":"changed","id":"28","r":"sensors","state":{"lastupdated":"2020-05-26T11:35:54.764","orientation":[-12,-30,-1007],"vibration":false},"t":"event","uniqueid":"28:6d:97:00:01:0a:7d:8d-01-fc02"} (ret = 194) 07:35:54:943 node 000178801085172A4 leave wait state 07:35:55:743 poll node 00:17:88:01:03:ab:53:0b-0b 07:35:55:743 Poll light node Upstairs Hall - Globe 07:35:55:792 read attributes of 0x0017880103AB530B cluster: 0x0006: [ 07:35:55:793 0x0000 07:35:55:793 ] 07:35:55:793 add task 4110 type 19 to 0x0017880103AB530B cluster 0x0006 req.id 28 07:35:55:793 Poll APS request 28 to 0x0017880103AB530B cluster: 0x0006 07:35:56:242 Daylight now: goldenHour1, status: 160, daylight: 1, dark: 0 07:35:56:368 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x05 pl[0]: 001 07:35:57:342 node 0001788010817BBBE leave wait state 07:35:58:589 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x07 pl[0]: 000 07:36:00:243 Idle timer triggered 07:36:00:243 Force read attributes for SensorNode Office - Motion Sensor

Short-press scene button (Scene recall):
07:38:08:971 Poll APS request 111 to 0xEC1BBDFFFE9870B3 cluster: 0x0006 07:38:11:271 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030) 07:38:11:677 Websocket 172.30.32.1:48632 send message: {"e":"scene-called","gid":"0","r":"scenes","scid":"1","t":"event"} (ret = 66) 07:38:11:678 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0005 cmd: 0x05 pl[0]: 000 07:38:13:242 timeout on poll APS confirm 07:38:13:242 Idle timer triggered 07:38:13:242 Force read attributes for SensorNode Upstairs Bath - Motion Sensor 07:38:14:168 poll node 00:17:88:01:08:14:22:de-0b 07:38:14:168 Poll light node Master Bed - Shower 1

Long-press scene button (Scene Store):
07:39:23:242 Idle timer triggered 07:39:23:243 binding for attribute reporting SensorNode Upstairs Bath - Motion Sensor of cluster 0x0406 seems to be active 07:39:23:243 Force read attributes for SensorNode Upstairs Bath - Motion Sensor 07:39:25:327 Poll APS confirm 210 status: 0xA7 07:39:25:327 drop item attr/modelid 07:39:25:328 drop item attr/swversion 07:39:25:328 drop item state/bri 07:39:25:328 drop item state/colormode 07:39:25:328 0x001788010840E680 error APSDE-DATA.confirm: 0xA7 on task 07:39:25:328 Erase task req-id: 210, type: 19 zcl seqno: 196 send time 11, profileId: 0x0104, clusterId: 0x0006 07:39:25:328 max transmit errors for node 0x001788010840E680, last seen by neighbors 14 s 07:39:25:909 poll node 00:17:88:01:06:bb:f7:fd-0b 07:39:25:909 Poll light node Kitchen - Track 6 07:39:25:958 read attributes of 0x0017880106BBF7FD cluster: 0x0006: [ 07:39:25:958 0x0000 07:39:25:958 ] 07:39:25:958 add task 5111 type 19 to 0x0017880106BBF7FD cluster 0x0006 req.id 40 07:39:25:958 Poll APS request 40 to 0x0017880106BBF7FD cluster: 0x0006 07:39:26:243 Daylight now: goldenHour1, status: 160, daylight: 1, dark: 0 07:39:26:385 void deCONZ::zmNode::setFetched(deCONZ::RequestId, bool) fetched item: 8, node: 0xE86B 07:39:27:238 Node data 0x0017880106f73465 profileId: 0x0104, clusterId: 0x0402 07:39:27:238 0x0017880106F73465: update ZCL value 0x02/0x0402/0x0000 after 0 s 07:39:27:238 no button map for: SML001 ep: 0x02 cl: 0x0402 cmd: 0x0A pl[0]: 000 07:39:27:238 ZCL attribute report 0x0017880106F73465 for cluster: 0x0402, ep: 0x02, frame control: 0x08, mfcode: 0x0000 07:39:27:238 payload: 0000297709 07:39:27:238 binding for attribute reporting of ep: 0x02 cluster 0x0402 seems to be active 07:39:27:238 binding for attribute reporting of ep: 0x02 cluster 0x0400 seems to be active 07:39:27:240 Websocket 172.30.32.1:48632 send message: {"e":"changed","id":"31","r":"sensors","state":{"lastupdated":"2020-05-26T11:39:27.237","temperature":2423},"t":"event","uniqueid":"00:17:88:01:06:f7:34:65-02-0402"} (ret = 165) 07:39:27:242 discard sensor state push for 31: state/lastupdated (already pushed) 07:39:27:382 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0005 cmd: 0x04 pl[0]: 000 07:39:30:243 Idle timer triggered 07:39:30:243 binding for attribute reporting SensorNode Upstairs Stair - Motion Sensor of cluster 0x0400 seems to be active 07:39:30:243 Force read attributes for SensorNode Upstairs Stair - Motion Sensor 07:39:31:271 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030) 07:39:31:743 binding/unbinding timeout srcAddr: 17880106F7537C, retry 07:39:32:753 Node data 0x90fd9ffffe652277 profileId: 0x0104, clusterId: 0x0006 07:39:32:753 0x90FD9FFFFE652277: update ZCL value 0x01/0x0006/0x0000 after 0 s 07:39:32:753 ZCL attribute report 0x90FD9FFFFE652277 for cluster: 0x0006, ep: 0x01, frame control: 0x08, mfcode: 0x0000

Short-press brighten button:
07:40:58:462 node 00017880104067772 leave wait state 07:41:00:813 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x06 pl[0]: 000 07:41:01:243 sql exec SELECT conf FROM zbconf ORDER BY rowid desc limit 1 07:41:01:243 Idle timer triggered 07:41:01:243 Force read attributes for SensorNode Garage - Door 07:41:01:270 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030)

Long-press and release brighten button:
07:42:06:828 Erase task req-id: 159, type: 19 zcl seqno: 248 send time 0, profileId: 0x0104, clusterId: 0x0006 07:42:07:662 node 000178801085172A4 leave wait state 07:42:07:817 poll node 00:17:88:01:03:ab:53:0b-0b 07:42:07:817 Poll light node Upstairs Hall - Globe 07:42:07:870 read attributes of 0x0017880103AB530B cluster: 0x0006: [ 07:42:07:870 0x0000 07:42:07:870 ] 07:42:07:870 add task 5873 type 19 to 0x0017880103AB530B cluster 0x0006 req.id 169 07:42:07:870 Poll APS request 169 to 0x0017880103AB530B cluster: 0x0006 07:42:08:242 binding/unbinding timeout srcAddr: 17880106F74F73, retry 07:42:09:105 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x05 pl[0]: 000 07:42:10:795 no button map for: RGBgenie ZB-5121 ep: 0x01 cl: 0x0008 cmd: 0x07 pl[0]: 000 07:42:11:242 Idle timer triggered 07:42:11:244 binding for attribute reporting SensorNode Office - Motion Sensor of cluster 0x0400 seems to be active 07:42:11:244 Force read attributes for SensorNode Office - Motion Sensor 07:42:11:281 COM: /dev/ttyACM0 : ConBee II (0x1CF1/0x0030)

Hopefully that's helpful, but if not let me know what else I can do. I appreciate you looking at this.