setup_windows.bat

REM Setup OptiScaler for your game
@echo off
cls
echo  ::::::::  :::::::::  ::::::::::: :::::::::::  ::::::::   ::::::::      :::     :::        :::::::::: :::::::::  
echo :+:    :+: :+:    :+:     :+:         :+:     :+:    :+: :+:    :+:   :+: :+:   :+:        :+:        :+:    :+: 
echo +:+    +:+ +:+    +:+     +:+         +:+     +:+        +:+         +:+   +:+  +:+        +:+        +:+    +:+ 
echo +#+    +:+ +#++:++#+      +#+         +#+     +#++:++#++ +#+        +#++:++#++: +#+        +#++:++#   +#++:++#:  
echo +#+    +#+ +#+            +#+         +#+            +#+ +#+        +#+     +#+ +#+        +#+        +#+    +#+ 
echo #+#    #+# #+#            #+#         #+#     #+#    #+# #+#    #+# #+#     #+# #+#        #+#        #+#    #+# 
echo  ########  ###            ###     ###########  ########   ########  ###     ### ########## ########## ###    ### 
echo.
echo Coping is strong with this one...
echo v2.5 - now with OptiPatcher support
echo.

del "!! EXTRACT ALL FILES TO GAME FOLDER !!" 2>nul

setlocal enabledelayedexpansion

if not exist OptiScaler.dll (
    echo OptiScaler "OptiScaler.dll" file is not found^^!
    echo Either a folder permissions issue or the repo source code was downloaded.
    echo.
    echo If "OptiScaler.dll" exists, please manually rename to a supported filename ^(e.g. dxgi/winmm.dll^) and you are done^^!
	echo No need to run the setup BAT again after renaming.
	echo.
    echo If .sln or .git files are in the folder, congratz, you have the source code. Now try properly downloading Opti please
    echo Hint - use the Releases page on GitHub, or RTFM :^)
    echo.
    echo.
    goto end
)


REM Check if old pre-0.9 additional files exist, along with an existing Opti installation
set "OLD_FILES_FOUND=0"
set "OPTI_DLL_LIST="
if exist nvapi64.dll set "OLD_FILES_FOUND=1"
if exist nvngx.dll set "OLD_FILES_FOUND=1"
if exist OptiScaler.asi set "OLD_FILES_FOUND=1"
if exist "Remove OptiScaler.bat" set "OLD_FILES_FOUND=1"

for %%F in (dxgi.dll winmm.dll d3d12.dll dbghelp.dll version.dll wininet.dll winhttp.dll) do (
    if exist "%%F" (
        set "origname="
        for /f "tokens=*" %%P in ('powershell -NoProfile -Command "(Get-Item '%%F').VersionInfo.OriginalFilename"') do (
            set "origname=%%P"
        )
        if /i "!origname!"=="OptiScaler.dll" (
            set "OLD_FILES_FOUND=1"
            set "OPTI_DLL_LIST=!OPTI_DLL_LIST! %%F"
        )
    )
)

if "!OLD_FILES_FOUND!"=="1" (
    echo WARNING: Possible old OptiScaler file^(s^) detected^^!
    if exist nvapi64.dll echo   - nvapi64.dll
    if exist nvngx.dll echo   - nvngx.dll
    if exist OptiScaler.asi echo   - OptiScaler.asi
    if exist "Remove OptiScaler.bat" echo   - Remove OptiScaler.bat
    for %%F in (!OPTI_DLL_LIST!) do echo   - %%F ^(original filename: OptiScaler.dll^)
    echo.
    echo These files may conflict with the current version of OptiScaler.
    echo It is recommended to delete them.
    echo.
    set /p "USER_CHOICE=Do you want to delete these files? (y/n): "
    echo.
    if /i "!USER_CHOICE!"=="y" (
        if exist nvapi64.dll (
            del nvapi64.dll
            echo Deleted nvapi64.dll
        )
        if exist nvngx.dll (
            del nvngx.dll
            echo Deleted nvngx.dll
        )
        if exist OptiScaler.asi (
            del OptiScaler.asi
            echo Deleted OptiScaler.asi
        )
        if exist "Remove OptiScaler.bat" (
            del "Remove OptiScaler.bat"
            echo Deleted Remove OptiScaler.bat
        )
        for %%F in (!OPTI_DLL_LIST!) do (
            del "%%F"
            echo Deleted %%F
        )
        echo Done^^!
    ) else (
        echo Skipping deletion. Note that these files may cause issues.
    )
    echo.
)

REM Set paths based on current directory
set "gamePath=%~dp0"
set "optiScalerFile=%gamePath%\OptiScaler.dll"
set setupSuccess=false

REM Check if the Engine folder exists
if exist "%gamePath%\Engine" (
    echo Found Engine folder, if this is an Unreal Engine game then please extract Optiscaler to #CODENAME#\Binaries\Win64
    echo.
    
    set /p continueChoice="Continue installation to current folder? [y/n]: "
    set continueChoice=!continueChoice: =!

    if "!continueChoice!"=="y" (
        goto selectFilename
    )

    goto end
)

REM Prompt user to select a filename for OptiScaler
:selectFilename
echo.
echo Choose a filename for OptiScaler (default is dxgi.dll, most compatible):
echo (For Vulkan, use winmm.dll. For XGP/MS Store, winmm/version.dll may be better)
echo.
echo  [1] dxgi.dll
echo  [2] winmm.dll
echo  [3] version.dll
echo  [4] dbghelp.dll
echo  [5] d3d12.dll
echo  [6] wininet.dll
echo  [7] winhttp.dll
echo  [8] OptiScaler.asi
echo.
set /p filenameChoice="Enter 1-8 (or press Enter for default): "

if "%filenameChoice%"=="" (
    set selectedFilename="dxgi.dll"
) else if "%filenameChoice%"=="1" (
    set selectedFilename="dxgi.dll"
) else if "%filenameChoice%"=="2" (
    set selectedFilename="winmm.dll"
) else if "%filenameChoice%"=="3" (
    set selectedFilename="version.dll"
) else if "%filenameChoice%"=="4" (
    set selectedFilename="dbghelp.dll"
) else if "%filenameChoice%"=="5" (
    set selectedFilename="d3d12.dll"
) else if "%filenameChoice%"=="6" (
    set selectedFilename="wininet.dll"
) else if "%filenameChoice%"=="7" (
    set selectedFilename="winhttp.dll"
) else if "%filenameChoice%"=="8" (
    set selectedFilename="OptiScaler.asi"
) else (
    echo Invalid choice. Please select a valid option.
    echo.
    goto selectFilename
)

if exist %selectedFilename% (
    echo.
    echo WARNING: %selectedFilename% already exists in the current folder.
    echo.
    set /p overwriteChoice="Do you want to overwrite %selectedFilename%? [y/n]: "
    set overwriteChoice=!overwriteChoice: =!
    
    echo.
    if "!overwriteChoice!"=="y" (
        goto checkWine
    )

    goto selectFilename
)

REM Wine doesn't support powershell
:checkWine
reg query HKEY_CURRENT_USER\Software\Wine >nul 2>&1
if %errorlevel%==0 (
    echo.
    echo Using wine, skipping over spoofing checks.
    echo If you need, you can disable spoofing by setting Dxgi=false in the config
    echo.
    pause
    goto completeSetup
) 

if exist %windir%\system32\nvapi64.dll (
    echo.
    echo Nvidia driver files detected.
    set isNvidia=true
) else (
    set isNvidia=false
)

REM Query user for GPU type
echo.
echo Are you using an Nvidia GPU or AMD/Intel GPU?
echo [1] AMD/Intel
echo [2] Nvidia
echo.

:gpuPrompt
if "%isNvidia%"=="true" (
    set /p gpuChoice="Enter 1 or 2 (Detected Nvidia): "
) else (
    set /p gpuChoice="Enter 1 or 2 (Detected AMD/Intel): "
)

if "%gpuChoice%"=="1" goto gpuValid
if "%gpuChoice%"=="2" goto gpuValid
echo Invalid input. Please enter 1 or 2.
echo.
goto gpuPrompt

:gpuValid

REM Skip spoofing if Nvidia
if "%gpuChoice%"=="2" (
    goto completeSetup
)

REM Query user for DLSS
echo.
echo Will you try to use DLSS inputs to replace with FSR/XeSS? (enables Nvidia spoofing, required for DLSS-FG, Reflex-^>AL2)
echo If you want to change the setting later, edit OptiScaler.ini and set Dxgi=false to disable spoofing and reverse.
echo.
echo [1] Yes
echo [2] No
echo.
set /p enablingSpoofing="Enter 1 or 2 (or press Enter for Yes): "

set configFile=OptiScaler.ini
if "%enablingSpoofing%"=="2" (
    if not exist "%configFile%" (
        echo Config file not found: %configFile%
        pause
    )

    powershell -Command "(Get-Content '%configFile%') -replace 'Dxgi=auto', 'Dxgi=false' | Set-Content '%configFile%'"
)

REM Decide whether to run OptiPatcher
echo.
if "%gpuChoice%"=="1" (
    echo AMD/Intel GPU detected - running OptiPatcher check.
    goto checkExistingOptiPatcher
)

:checkExistingOptiPatcher
set "foundOptiPatcher="
for %%F in (plugins\*OptiPatcher*.asi) do (
    set "foundOptiPatcher=%%F"
)

if defined foundOptiPatcher (
    echo.
    echo OptiPatcher found: !foundOptiPatcher!
    echo If the existing version works properly, might be best to keep it.
    set /p optiRedownload="Do you want to re-download a possibly newer version [y/n]? "
        
    if /i "!optiRedownload!"=="y" (
        echo.
        echo Deleting !foundOptiPatcher!...
        del "!foundOptiPatcher!"
        goto checkOptiPatcher
    ) else (
        echo.
        echo Keeping existing OptiPatcher - skipping download.
        goto completeSetup
    )
)

REM Not installed - continue to download
goto checkOptiPatcher

:checkOptiPatcher
REM Check connectivity
echo.
echo Checking for OptiPatcher compatibility...
echo Press Ctrl+C if this gets stuck to skip to setup completion.

ping -n 1 -w 3000 github.com >nul 2>&1
if %errorlevel% neq 0 (
    echo Offline or GitHub blocked. Skipping OptiPatcher check.
    goto completeSetup
)

set "OPTI_MATCH=NO"
for /f "usebackq tokens=*" %%A in (`powershell -Command "& { $rawUrl = 'https://raw.githubusercontent.com/optiscaler/OptiPatcher/main/OptiPatcher/dllmain.cpp'; try { $code = (Invoke-WebRequest -Uri $rawUrl -UseBasicParsing).Content } catch { return 'ERR' }; $supported = @(); $ueMatches = [Regex]::Matches($code, 'CHECK_UE\s*\(\s*([a-zA-Z0-9_]+)\s*\)'); foreach ($m in $ueMatches) { $base = $m.Groups[1].Value; $supported += ($base + '-win64-shipping.exe').ToLower(); $supported += ($base + '-wingdk-shipping.exe').ToLower(); }; $directMatches = [Regex]::Matches($code, 'exeName\s*==\s*[\x22\x27]([^\x22\x27]+)[\x22\x27]'); foreach ($m in $directMatches) { $supported += $m.Groups[1].Value.ToLower(); }; $localFiles = Get-ChildItem *.exe | Select-Object -ExpandProperty Name; foreach ($file in $localFiles) { if ($supported -contains $file.ToLower()) { Write-Output 'YES'; exit; } }; Write-Output 'NO'; }"`) do (
    set "OPTI_MATCH=%%A"
)

if "!OPTI_MATCH!"=="YES" (
    echo.
    echo OptiPatcher support detected^^!
    echo An Opti plugin used for unlocking DLSS/DLSS-FG inputs, avoiding spoofing and performance overhead in supported games.
    echo More info available on OptiPatcher Github
    echo.
    set /p downloadOptiPatcher="Download OptiPatcher.asi? [y/n]: "
    set downloadOptiPatcher=!downloadOptiPatcher: =!
    
    if "!downloadOptiPatcher!"=="y" (
        echo.
        echo Preparing plugins folder...
        if not exist "plugins" mkdir "plugins"
        
        echo Downloading OptiPatcher...
        echo Press Ctrl+C if this gets stuck to skip to setup completion.
        echo.
        powershell -Command "Invoke-WebRequest -Uri 'https://github.com/optiscaler/OptiPatcher/releases/download/rolling/OptiPatcher.asi' -OutFile 'plugins\OptiPatcher.asi'"
        if errorlevel 1 goto completeSetup
        
        if exist "plugins\OptiPatcher.asi" (
            echo OptiPatcher.asi downloaded successfully.
            echo Enabling ASI loading in OptiScaler.ini...
            if exist "%configFile%" (
                powershell -Command "(Get-Content '%configFile%') -replace 'LoadAsiPlugins=auto', 'LoadAsiPlugins=true' | Set-Content '%configFile%'"
                echo Successfully enabled ASI loading in OptiScaler.ini^^!
            ) else (
                echo Warning: OptiScaler.ini not found, could not enable LoadAsiPlugins.
            )
        ) else (
            echo Failed to download OptiPatcher.asi.
        )
     timeout /t 3
    )
)
echo.

goto completeSetup

:completeSetup
REM Rename OptiScaler file
echo.
if "!overwriteChoice!"=="y" (
    echo Removing previous %selectedFilename%...
    del /F %selectedFilename% 
)

echo Renaming OptiScaler file to %selectedFilename%...
rename "%optiScalerFile%" %selectedFilename%
if errorlevel 1 (
    echo.
    echo ERROR: Failed to rename OptiScaler file to %selectedFilename%. Most likely due to folder permissions issues.
    echo Please rename OptiScaler.dll manually to %selectedFilename%^^! No need to run setup BAT again after that.
    echo.
    goto end
)

goto create_uninstaller

:create_uninstaller_return

cls
echo  OptiScaler setup completed successfully...
echo.
echo   ___                 
echo  (_         '        
echo  /__  /)   /  () (/  
echo          _/      /    
echo.

set setupSuccess=true

:end
pause

if "%setupSuccess%"=="true" (
    del "setup_linux.sh"
    del %0
)

exit /b

:create_uninstaller
copy /y NUL "Remove OptiScaler.bat"

(
echo @echo off
echo cls
echo echo  ::::::::  :::::::::  ::::::::::: :::::::::::  ::::::::   ::::::::      :::     :::        :::::::::: :::::::::  
echo echo :+:    :+: :+:    :+:     :+:         :+:     :+:    :+: :+:    :+:   :+: :+:   :+:        :+:        :+:    :+: 
echo echo +:+    +:+ +:+    +:+     +:+         +:+     +:+        +:+         +:+   +:+  +:+        +:+        +:+    +:+ 
echo echo +#+    +:+ +#++:++#+      +#+         +#+     +#++:++#++ +#+        +#++:++#++: +#+        +#++:++#   +#++:++#:  
echo echo +#+    +#+ +#+            +#+         +#+            +#+ +#+        +#+     +#+ +#+        +#+        +#+    +#+ 
echo echo #+#    #+# #+#            #+#         #+#     #+#    #+# #+#    #+# #+#     #+# #+#        #+#        #+#    #+# 
echo echo  ########  ###            ###     ###########  ########   ########  ###     ### ########## ########## ###    ### 
echo echo.
echo echo Coping is strong with this one...
echo echo v2.5 - now with OptiPatcher support
echo echo.
echo.
echo set /p removeChoice="Do you want to remove OptiScaler? [y/n]: "
echo echo.
echo if "%%removeChoice%%"=="y" ^(
echo    del OptiScaler.log
echo    del OptiScaler.ini
echo    del %selectedFilename%
echo    del fakenvapi.dll
echo    del fakenvapi.ini
echo    del fakenvapi.log
echo    del dlssg_to_fsr3_amd_is_better.dll
echo    del dlssg_to_fsr3.log
echo    del /Q D3D12_Optiscaler\*
echo    rd D3D12_Optiscaler
echo    del /Q DlssOverrides\*
echo    rd DlssOverrides
echo    del /Q Licenses\*
echo    rd Licenses
echo    echo.
echo    echo Deleting OptiPatcher if present
echo    del plugins\OptiPatcher.asi
echo    rd plugins
echo    echo.
echo    echo OptiScaler removed^^! Ignore the warnings about missing files.
echo    echo.
echo ^) else ^(
echo    echo.
echo    echo Operation cancelled.
echo    echo.
echo ^)
echo.
echo pause
echo if "%%removeChoice%%"=="y" ^(
echo   del %%0
echo ^)
) >> "Remove OptiScaler.bat"

echo.
echo Uninstaller created.
echo.

goto create_uninstaller_return